1 / 9
Angled stand for TheMidiMaker Sparrow 5x100mm MIDI controller — image 1
1 / 9

Angled stand for TheMidiMaker Sparrow 5x100mm MIDI controller

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

50° angled stand for Sparrow 5x100mm MIDI controller with cable management holes. Screws into base with M3x8 bolts.

Rating
0 / 5
Likes
1
Downloads
10
Makes
0
Views
91
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial

An angled stand for the Sparrow 5x100mm MIDI controller.

 

Hardware

Features

  • 50° angle
    • Designed to match Stream Deck+ and Stream Deck XL angle
    • The stand is angled at 45°. The device comes with a built-in 5° angle. The resulting total angle is 50°.
  • Screws into base of device with 4 M3x8 bolts
    • Might work with the included screws but I did not test it
  • Cable management
    • A covered back with a cable management hole
    • Two cutouts to pass cables through the left or right side of the base of the stand
    • A hole in the base to allow managing cables without unscrewing stand

Suggestions

  • Put rubber feet or magnets on the bottom
  • Works best with a right angle adapter for the power cord

 

Tags