ROTENSO AC controller enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for ROTENSO Air Conditioning Controller / HMI / Touch Panel for surface mounting
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Enclosure for ROTENSO Air Conditioning Controller / HMI / Touch Panel for surface mounting.
Dimensions: 176x111x40,6mm
Panel is mounted on metal plate with magnets, which should be provided with panel. To mount plate to enclosure You need 4x M3x8 or M3x10 and 4x M3 nuts.
Enclousre has one dia. 8mm bore for cable, on the side.
Enclosure is symmetric (not including the cable entry opening) and can be flipped.
Mounting: 4x 4-4,5 mm diameter screws. In 135 x 76mm spacing. With some possibility to adjustment.
Pictures shows previous version of enclosure. New has improved printability by dividing air vents into two parts.
I printed mine with PCTG to give it good impact, thermal, and UV resistance. PETG should be also ok.
Designed for nozzle 0,6 and 0,4; layer: 0,2.