Audio Technica ATH-M30x M50x Headband
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printable headband replacement for the ATH-M30x and others in the family (M50x)
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 78
- Makes
- 0
- Views
- 1,740
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I just wanted to make my M30x immortal so yeah
I tried printing this out of a bunch of different filaments but I found that PETG is the best material for it.
So far I tried random PLA+s, ABS+s and PETGs
Most PLA+ lasts around a month, ABS+ lasts just over a month (slightly longer than PLA+) and PETG has been going strong for 2 months so far.
Update: The v7 PETG band died at 10 months and the v8 should have fixed the stress concentration.
Update: The v8 PETG band died at 18 months and the v9 should further reduce the stress concentration.
Personally I added adhesive backed foam and wrapped the band with a section of black denim
So print in PETG with no supports
Non-Printed Hardware:
Requires 2x M3 ~10mm screws, 2x M3 Nuts, and 2x M3 ~9mm Washers