1 / 2
Self Watering Hex Pot V2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is an improvement to the original HexPot V1 with holes for support modular support rings.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
this is an improvement to the original HexPot V1 with holes for support modular support rings. the inner hex pot needs to be printed with 0% infill and 0 top layers. i printed mine with 3 perimiters. also after printing drill or poke holes in the bottom of the inner pot, you can use a soldering iron, or a heated rod. ive used a drill before but you have to be careful as it tends to crack along the layer lines. also i left the support hole thats right next to the fill hole empty so its easier to water.