Self Watering Hex Pot V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is an improvement to the original HexPot V1 with holes for support modular support rings.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
this is an improvement to the original HexPot V1 with holes for support modular support rings. the inner hex pot needs to be printed with 0% infill and 0 top layers. i printed mine with 3 perimiters. also after printing drill or poke holes in the bottom of the inner pot, you can use a soldering iron, or a heated rod. ive used a drill before but you have to be careful as it tends to crack along the layer lines. also i left the support hole thats right next to the fill hole empty so its easier to water.