Keto-Mojo GK+ Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The case holds a Keto-Mojo Blood Glucose and Ketone Meter and accessories.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 26
- Makes
- 1
- Views
- 263
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution
The case holds a Keto-Mojo Blood Glucose and Ketone Meter and it's accessories. It offers a few advantages over the original model:
- Removed slots for test strip calibration fluid.
- Enlarged storage for lancets.
- Storage pocket is secured with screws.
- Changed nearly all fillets to chamfers.
I find that I rarely use the calibration fluid and would prefer to have more room for lancets, so I made this change.
I also changed the storage pocket to use a panel that is secured with screws and heat set inserts. This gives the storage pocket a somewhat refined look as well as the option to easily reconfigure the pocket in the future with new or different panels.
To assemble the box you’ll need the following hardware:
- Qty 6: M3 x 30mm bolts. I used button head screws but cap head screws will also work. These are used in the hinge and latch mechanisms.
- Qty: 10: M3 x 8mm flat head screws. These are used to secure the storage pocket panel.
- Qty 10: M3 x 6mm Long x 5mm OD Heat Set Inserts
PETG is recommended for printing the box for strength and durability. I used 5 perimeters/walls and printed the box with a .20 layer height. Print as the models are placed.
The seal is optional, but if used, print in TPU or some other flexible filament.
Happy Printing!