Mudguard Extension Fiido Titan E-Bike
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Original Mudguards leave your feet soaked and face splattered and spray from the front top wheel goes everywhere.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 41
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mudguard Extensions for Fiido Titan E-Bike
Original Mudguards leave your feet soaked and face and back splattered and spray from the front top wheel goes onto the bike and your pants.
Rear wheel needs only "Bottom"
Front wheel needs “Top” and “Bottom” part.
Print like in picture. I printed in PETG more with 4 perimeters.
For the best fit the original mudguard should be cut back a little to leave a straight edge. I didnt try this but you could try without cutting first and if its not a rigid fit then you can still go ahead and cut it.
I used small self tapping screws to go through the outer layer of the extension and through the original mudguard. Fit the Mudguard Extension then drill through all 3 layers with a small 1.5mm drill, then add the screw. Make sure the screw isnt too long to touch of course ;-)
Works perfectly for me, feet dont get wet even through big puddles, no spray anywhere on my back or face etc and bike stays A LOT cleaner.
Have fun and feel free to ask anything if I can help.