1 / 2
Gridfinity socket holders on rails
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print this to hold your nuts.
- Rating
- 4.667 / 5
- Likes
- 62
- Downloads
- 315
- Makes
- 2
- Views
- 1,628
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Features:
- Holders
- Different sizes for 1/4, 3/8 and 1/2 inch size sockets
- Conical holders prevent sticking, but allow tilting - Better than the normal ones when used stationary, worse when used in a drawer.
- Can slide past each other when on neighbouring rails
- No socket retention (Not necessary for non-mobile tool storage in my opinion, would therefore be needlessly complicated. Most good systems are probably also patented.)
- Positioning completely flexible, not designed for any particular brand or model of socket
- Rails
- Three full rails per grid space
- Can be tiled in any direction. Half rails on the edge form an additional rail on the seam between neighbouring rail tiles for more placement flexibility.
- Very space efficient. Depending on nut size, you can reasonably get
- up to 2 rows of 1/4 sockets per 1 grid space
- up to 3 rows of 3/8 sockets per 2 grid spaces
- 1 row of 1/2 sockets per grid space
Print right side up. No supports necessary.