Creality Sprite Extruder Inductive Probe Mount - no support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for inductive prove for sprite extruder Prints without support
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
I am a student and couldn't afford a BL touch so I made a mount for an Inductive probe.
I have an ender 3v2 - with sprite pro extruder & klipper.
The mount screws onto where the BL touch would normally go.
I did have to make an optocoupler circuit and tap into my Z-limit switch to get the probe to work but there are videos online on how to do that.
I had to make a custom Klipper config file.
Here is the probe offset details.
[probe]
pin: ^!PA7
x_offset: -46 # Your probe is 46mm left of the nozzle
y_offset: -40.7 # Your probe is 40.7mm in front of the nozzle
#z_offset: 0.0 # You will calibrate this later with PROBE_CALIBRATE