Creality Sprite Extruder Inductive Probe Mount - no support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for inductive prove for sprite extruder Prints without support
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I am a student and couldn't afford a BL touch so I made a mount for an Inductive probe.
I have an ender 3v2 - with sprite pro extruder & klipper.
The mount screws onto where the BL touch would normally go.
I did have to make an optocoupler circuit and tap into my Z-limit switch to get the probe to work but there are videos online on how to do that.
I had to make a custom Klipper config file.
Here is the probe offset details.
[probe]
pin: ^!PA7
x_offset: -46 # Your probe is 46mm left of the nozzle
y_offset: -40.7 # Your probe is 40.7mm in front of the nozzle
#z_offset: 0.0 # You will calibrate this later with PROBE_CALIBRATE