1 / 6
Krytka a spojka pro rybářské vidličky Delphin / Cap and Coupler for Delphin Fishing Banksticks — image 1
1 / 6

Krytka a spojka pro rybářské vidličky Delphin / Cap and Coupler for Delphin Fishing Banksticks

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Krytka a spojka na rybářské vidličky Delphin / Protective cap & coupler for Delphin Fishing banksticks

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
96
Reviews
0

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution

🇨🇿 Čeština   (🇬🇧 English version bellow)

🔧 Motivace:
Rád využívám na rybaření běžné kovové zapichovací vidličky, ale vadilo mi, že při přenášení poškozují tašku a že na ně nebylo možné sehnat žádnou pořádnou krytku ani spojku. Proto vznikl tento jednoduchý, ale praktický doplněk.

🛠 Kompatibilita:
Navrženo pro rybářské vidličky Delphin s průměrem cca 8–8,1 mm, např. model:
Delphin Vidlička ocelová se závitem 40–70 cm:
https://eshop.moss.sk/?moss=produkt&oc=900032220 
https://www.alza.cz/sport/delphin-vidlicka-ocelova-se-zavitem-40-70cm-d5351604.htm

💡Tipy:
- Pro odladění velikosti na jiné vidličky je možné nejprve vytisknout díl “spojka” s úpravou výšky např. na 2 mm. Podle výsledku můžete případně upravit měřítko celého modelu… 
- Nejprve se na konce vidliček nasadí spojka, natáhne se cca do poloviny délky vidliček a zároveň se srovnají stavěcí šroubky vidliček, aby směřovaly do boku. Nádledně se nasadí spodní krytka vidliček. Vše se zpevní dotažením spojky dále od špiček.

⚙ Parametry tisku:
- Materiál: PETG
- Výplň: 40 %
- Počet perimetrů: 10
- Plný materiál – z důvodu odolnosti; Vnitřní část krytky je dutá
- Soubory: STL i .3mf projekt pro Prusa Slicer (pro Prusa Core One) 
- Podpěry: nejsou potřeba

--------------------------

🇬🇧 English

🔧 Motivation:
I like using standard metal banksticks fo fishing, but they tend to damage my bag during transport and I couldn’t find any usable cap or coupler for them. So I designed this simple and practical add-on.

🛠 Compatibility:
Designed to fit Delphin finshing banksticks with approx. 8–8.1 mm diameter, e.g.:
Delphin Steel Bankstick 40–70 cm:
https://eshop.moss.sk/?moss=produkt&oc=900032220 
https://www.alza.cz/sport/delphin-vidlicka-ocelova-se-zavitem-40-70cm-d5351604.htm

💡Tips:
- To adapt the size for different banksticks, you can first print the “coupler” part with a reduced height, e.g. 2 mm. Based on the result, you can then adjust the scale of the full model if needed.
- First, slide the coupler onto the ends of the banksticks and push it roughly halfway along their length. At the same time, align the adjustment screws so they point sideways. Then attach the bottom cap to cover the pointed ends. Finally, secure everything by sliding the coupler further away from the tips and tightening it.

⚙ Print settings:
- Material: PETG
- Infill: 40%
- Perimeters: 10
- Solid model for durability; The inside of the cap is hollow.
- Files: STL + .3mf file for Prusa Slicer (optimized for Prusa Core One)
- Supports: not needed

Tags