Swarf collector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make use of old microwave owen magnets and build a swarf collector.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 18
- Makes
- 1
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Make use of old magnets and build a swarf collector.
Magnets comes from scrapped microwave owens, and they all seam to have the same size (!?). Print it, and glue the parts together.
You need 8 x magnets ⌀57mm (2" 16/64) ~10-12mm (" 25/64) thick with a center hole ⌀20.5mm (~ "50/64), these ones can be sourced from scraped microwave owens.
Also 3x M6 nuts, a 410mm (16" 9/64) M6 threaded rod and some glue is needed.
Print with PETG, layer height 0.2, 15-30% grid infill and no support.
typicall microwave owen magnetsos
M6 threaded rod, M6 buts and glue
