Fabric Drawer stopper clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stop fabric drawers from falling out when pulling them out too far. Simply slides in place, held with friction.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 1
- Views
- 164
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I had a problem where my nephew kept pulling these drawers out, so I made a solution.
These simply slide onto the side of the fabric boxes and are held by friction. I had to make 2 variants for my drawers, the original design that has a 30mm depth for all but one drawer and a 40mm depth variant for the top as the original design collided with a screw head.
You are still able to remove the drawers without taking the stoppers off, just by bending one of the sides of the drawers while pulling them out.
I used a 3% gyroid infill, 0.4mm nozzle, 0.26mm layer height and 0.44 extrusion width with Amazon Basics PLA on a CR-10 Max. Each clip weighs around 3g and is quite strong.
This is my first design, so go easy on me.