3.5in Hard Drive Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3.5in hard drive case with latches and rubber seal
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 30
- Makes
- 0
- Views
- 534
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I designed this case to keep my offline backup hard drives safe(er).
The case is strong, stacking, with over-center latches and a TPU rubber seal.
This case requires a decent amount of assembly, since the latches are all separate pieces. On the plus side though, they are strong, and it can all be printed without supports.
I printed the cases from PETG with 10% gyroid infill and 2 walls.
The latch parts can printed also in PETG or something stronger with 100% infill.
I printed the seal using 85A TPU.
The latches require a 2.4mm pin (I used alloy TIG filler rod cut to length) and a M3 screw & nut. The latches are glued onto the case with superglue (cyanoacrylate).