Tape dispenser roll
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.27 – €0.33 net (excluding VAT)
For file: Axis_0.1mm_PETG_MK3S_26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.30 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 25.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A roll for a Tesa tape dispenser.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 210
- Makes
- 1
- Views
- 1,022
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement roll for a Tesa tape dispenser.
Tape roll inner diameter 26 mm / width 20 mm.
Nominal axis diameter 4 mm / length 26.2 mm.
The roll is assembled from 3 parts:
- 1 x roll,
- 2 x axis.
Axle parts are tight press fitted into the rolle.
I used PETG, but PLA should work (probably even better).
The inner diameter of the roll needed to be sanded slightly (removal of stringing) to get the axle in the right position.
Print settings:
- Layer height: 0.1 mm
- Perimeters: 3
- Supports: No