Thermaltake Core P3 Fan and Radiator Mounting Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan & Radiator mount for Thermaltake Core P3 Chassis. Able to accomodate various widths of up to 360/420mm radiators.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 183
- Makes
- 0
- Views
- 734
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Mounting bracket/arm for fans or radiators for the Thermaltake Core P3 chassis.
There are 2 versions depending if you are mounting a 120mm or 140mm type of fan or radiator:
- 360mm mount (slimmer)
- (For 120mm Fans or 120/240/360mm Radiators)
- 360/420mm mount
- (For 120/140mm Fans or 120/240/360/140/280/420mm Radiators)
For larger printers (350x350mm), you can print the entire mount easily. For smaller printers (180x180mm), you will need to print Side A and Side B and combine both with the joint file. It is friction fit.
A push/pull fan configuration is also possible for the 130mm and 158mm wide files.
Print with 0.20mm layer height and >30% infill.
* I've also included some additional options for wider radiators typically seen for custom watercooling loops. For example, the EK-Quantum Surface X360M is 130mm wide even though it uses 120mm fans. The file “360mm Whole (130mm Wide)” would hence be suitable for use.
