1 / 2
Canoe Yoke Clamp Bar
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parameterized onshape model so you can generate the size you need
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 7
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parameters should allow you go generate the fit you need. The canoe I built this for had THICK gunwales so the #rocker parameter was set so I could get the bite I needed. Otherwise play with the length, thickness, width, etc. that you want to fit YOUR canoe.
As printed, I used 5/16" star knobs and 5/16 x 3" carriage bolts. I COULD add more “square” slot to make the carriage bolt travel a little greater.
My print settings with 3dxtech ASA (yeah, theyre beefy… base your settings on how much risk you want to accept with your canoe…
- 5 solid layers top and bottom
- 5 perimeters
- 30% gyroid infill
- I printed “on the side” so the carriage bolt slot is horizontal, so I turned on organic supports to get a good top surface to the slot