1 / 12
CFMOTO 650 MT/Adventura GARMIN Power-Switch mount — image 1
1 / 12

CFMOTO 650 MT/Adventura GARMIN Power-Switch mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

CFMOTO 650 MT/Adventura GARMIN Power-Switch mount *Design ver-15 uploaded 6-14-2025 for printing in Polymaker PET-CF17*

Rating
0 / 5
Likes
1
Downloads
15
Makes
4
Views
207
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

CFMOTO 650 MT/Adventura GARMIN Power-Switch mount

I burned out a Healtech Electronics relay module. Don't know how. Supply fuse never blew. Some internal component failed. Ran fine for a year and a half. Now I needed something different. 


https://www.healtech-electronics.com/products/tb/

 

I purchased a GARMIN Power Switch. I need a place to mount it under my seat. Needed a custom mount. I no longer used the supplied CFMOTO GPS module under the seat. Removed that bracket, and mounted in that location with the same bolts.

https://www.garmin.com/en-US/p/718849/

 

Printed in 3D Fuel PRO PCTG in FDE color.

https://www.3dfuel.com/products/pro-pctg-flat-dark-earth-1-75mm



 

I thought all the geometry was 100% perfect. Very close. See the above picture where it barely touches the bike’s computer plug cirlcled in green). I will re-adjust that spot and re-print in Polymaker PET-CF17.

 

https://us.polymaker.com/products/fiberon-pet-cf17?_pos=1&_psq=PET-CF&_ss=e&_v=1.0
 

Design ver-15 uploaded 6-14-2025. (for printing with Polymaker PET-CF17)


 

Tags