Exchangeable labels for Prusa Enclosure MK4 Nozzle & Hotend Holder Remix
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.21 – €1.48 net (excluding VAT)
For file: mk4-hotend-holder-remix-labels_0.4n_0.2mm_PETG,PETG_MK4SMMU3_1h31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.34 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.52 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Exchangeable labels for the remix version of the Prusa Enclosure MK4 Nozzle / Hotend Holder
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I wasn't quite sure about the naming (feedback welcome) but this is the current naming scheme:
- Nozzle Sizes: 0.25, 0.4, 0.5, 0.6, 0.8, 1.0
- Types:
- B -Brass
- HB - High Flow Brass
- S - Steel
- X - Nozzle X
- R - Ruby
- O - ObXidian
- HO - High Flow ObXidian
- D - Diamond
- (size only)
- and blank one without any text
Usage
- Print and simply insert it (after removing the supports of course^^)
- To remove the label again, simply use a thin needle (I personally use tweezers) insert it into the notch and push it out 👌
Print Instructions
- Print one (non mmu) for testing and if it works for your, print all at once to save time and filament
- Text must face up, print with supports
- see provided 3mf
- Simply take the 3mf, move the ones you like on a new plate and slice it.
- Eventually change the extruders (or do it on the printer later) or remove the height Modifier completely
- Each model has a height modifier so you can change the color for each plate or use the Color Painting mode if you want to different colors for nozzle type and size