1 / 4
HEXA-CUT Planter and Pot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slightly overdesigned hex themed self-watering planter | No supports needed, print in place
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 149
- Makes
- 1
- Views
- 388
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Minimalist, modern flower pot, optimized for 3D printing, no supports or top and bottom layers needed.
Orientation is important:

The planter sits neatly in the drainer

Print recommendations:
| Setting | Recommended Value |
|---|---|
| Layer height | 0.25 mm |
| Nozzle size | 0.4 mm (or larger) |
| Wall/perimeter lines | 2-3 |
| Top/bottom layers | 0 |
| Infill | 15-25% |
| Supports | No supports |
| Brim | Optional |
| Material | PLA, PETG, Wood PLA, etc |
| Orientation | Print top-down |
| Fuzzy skin | Outer walls only (optional) | thickness: 0,25; width: 0,25 |
| Seams | Random |
| Size | 100-150% |
Check my slicer setting in the .3mf files
You can put in yawn or wick for self-watering
