1 / 1
Gaggia Classic Pro funnel (no support) PEX tubing version — image 1

Gaggia Classic Pro funnel (no support) PEX tubing version

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A funnel replacement for the GCP/Evo/E24 that uses PEX tube instead of the stainless one from the original model.

Rating
0 / 5
Likes
5
Downloads
67
Makes
0
Views
423
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

All parts should print with no supports and use the original screws. The larger screw holes have a thin layer blocking the hole this is normal to improve printing without supports and the screw will just push thru this layer.

The lid prints right side up “small side down”

The Parts ending in 16 are for metric 16mm pex and the ones ending in 12 are for imperial half inch. If the test prints for 16mm are too tight try the ½" if that is too tight try the 12+ parts as they have a tiny bit more tolerance added, it should be a stiff friction fit, if it's easy to slides right on try the next size down. The lid works for all pex size funnels.

Tags