Self-Draining Soap Dish |Drains Directly Into Sink
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A soap dish that doesn't get wet
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Self-Draining Soap Holder – Redirects Water Back to the Sink
I made this soap holder because I got tired of mushy soap and messy countertops, or having to manually remove the water from the soap dish all the time. I designed this soap holder to keep your soap dry while neatly redirecting excess water straight into the sink — no puddles, no mess. Perfect for bathroom sinks or kitchen counters, this design uses angled channels to naturally guide water away from the soap and back into the sink basin.
Printing Tips:
- Material: PLA, PETG (for high moisture resistance)
- Supports: ARE required
Build plate: I used the Bambu Build Plate Super-Tack to print the objects vertically and save on support material. If you plan to use any other build plate, be sure to use glue
<<< 2 pieces for easy cleaning, perfect fit: just place it on top
Print Profile Settings:
Support settings:
distanza z superiore - 0,275
trama interfaccia - rettilineo
spaziatura interfaccia superiore - 0
These support settings may vary based on your printer (these are for Bambulab)
Have fun printing!