Self-Draining Soap Dish |Drains Directly Into Sink
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A soap dish that doesn't get wet
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Self-Draining Soap Holder – Redirects Water Back to the Sink
I made this soap holder because I got tired of mushy soap and messy countertops, or having to manually remove the water from the soap dish all the time. I designed this soap holder to keep your soap dry while neatly redirecting excess water straight into the sink — no puddles, no mess. Perfect for bathroom sinks or kitchen counters, this design uses angled channels to naturally guide water away from the soap and back into the sink basin.
Printing Tips:
- Material: PLA, PETG (for high moisture resistance)
- Supports: ARE required
Build plate: I used the Bambu Build Plate Super-Tack to print the objects vertically and save on support material. If you plan to use any other build plate, be sure to use glue
<<< 2 pieces for easy cleaning, perfect fit: just place it on top
Print Profile Settings:
Support settings:
distanza z superiore - 0,275
trama interfaccia - rettilineo
spaziatura interfaccia superiore - 0
These support settings may vary based on your printer (these are for Bambulab)
Have fun printing!