1 / 3
Ender 3 Max Neo Direct Drive
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Direct Drive modification using K1 hotend and extruder for the Ender 3 Max Neo.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 14
- Makes
- 0
- Views
- 372
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This model is composed of,
- K1 hotend, older version, did not test with the newer unicorn nozzle because the distance between the extruder and hotend is not the same;
- K1 extruder, i used one of those knock offs;
- 4010 fan for the hotend;
- 5015 fan for the part fan;
- M2 screws for - holding the CR holder part and the hotend
- M3 screws for - all the other parts
If you see a hole with Ø4,2mm, it is for a M3 insert.
If you see a hole with Ø2,8mm, it is for a M2 insert, there are 4, two for the hotend and two for the CR holder part.
I did not account for the used bolts, please see yourselft.
IMPORTANT: Requires drilling the X plate carriage to install it.