1 / 1
Voron 0.2 Printable Mini-Fridge Door for 80mm tophat with 30mm extender — image 1

Voron 0.2 Printable Mini-Fridge Door for 80mm tophat with 30mm extender

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Voron 0.2 Printable Mini-Fridge Door for 80mm tophat with 30mm extender.

Rating
0 / 5
Likes
3
Downloads
27
Makes
0
Views
230
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Voron 0.2 Printable Mini-Fridge Door for 80mm tophat with 30mm extender.

I wanted a Mini-Fridge Door without needing to buy new extrusions.

It is designed for a Voron 0.2 with a standard 80mm tophat but with a 30mm extender. The idea is to use the original panels to create an airgap for higher chamber temperatures.

BOM:

  • 2 x M5x30 BHCS/SHCS acting as a pin for the left hinges
  • 2 x M5 hex nut / nyloc nut acting to keep the M5 bolt in its position
  • ? x M3x5x4 heatset inserts (standard Voron size)
  • 1 x 339mmx209mmx 3mm PC/Acrylic panel 
  • 4 x 5mm ID, 8mm OD, 7mm depth bushing (these are reused from an old Ender 3/5)

THIS UNTESTED. I haven't figured how to recreate the handle/latch using M5 bolts instead of pins.

I hope this gets picked up the community and improved :)

Tags