1 / 1
Voron 0.2 Printable Mini-Fridge Door for 80mm tophat with 30mm extender
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Voron 0.2 Printable Mini-Fridge Door for 80mm tophat with 30mm extender.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Voron 0.2 Printable Mini-Fridge Door for 80mm tophat with 30mm extender.
I wanted a Mini-Fridge Door without needing to buy new extrusions.
It is designed for a Voron 0.2 with a standard 80mm tophat but with a 30mm extender. The idea is to use the original panels to create an airgap for higher chamber temperatures.
BOM:
- 2 x M5x30 BHCS/SHCS acting as a pin for the left hinges
- 2 x M5 hex nut / nyloc nut acting to keep the M5 bolt in its position
- ? x M3x5x4 heatset inserts (standard Voron size)
- 1 x 339mmx209mmx 3mm PC/Acrylic panel
- 4 x 5mm ID, 8mm OD, 7mm depth bushing (these are reused from an old Ender 3/5)
THIS UNTESTED. I haven't figured how to recreate the handle/latch using M5 bolts instead of pins.
I hope this gets picked up the community and improved :)