Makita guiderail adapter for DSS610
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Separate STL files for 3D printing Makita guiderail adapter for DSS610
- Rating
- 3.5 / 5
- Likes
- 23
- Downloads
- 294
- Makes
- 1
- Views
- 1,209
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Perfect fit guiderail adapter for Makita DSS610. Didn't change anything. Just separated Tomt95 parts.
You need to print the following parts:
Adapter_Glider x1
Adapter_Main_Left x1
Adapter_Main_Right x1
Adapter_Main_Block_Center x1
Adapter_Main_Block_Edge x2 ( one mirrored)
Adapter_Main_Knob x2
Adapter_Slider_Adjust x2
You also need:
3.0x12mm screws x24 (main screws to hold Blocks and slider_adjust, Glider)
M5x20 Bolts with nuts x2 ( these are for the Knobs, you need to countersink the bottom. Or model in a new countersink to the bottom of Main_Left/Right)
M4x20 Bolts with nuts x2 (these go into the middle of Slider_Adjust to dial in the fit).
PS: Might want to use brim on MAIN_LEFT/RIGHT parts.