Makita guiderail adapter for DSS610
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Separate STL files for 3D printing Makita guiderail adapter for DSS610
- Ocena
- 3,5 / 5
- Polubienia
- 23
- Pobrania
- 294
- Wydruki
- 1
- Wyświetlenia
- 1209
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Perfect fit guiderail adapter for Makita DSS610. Didn't change anything. Just separated Tomt95 parts.
You need to print the following parts:
Adapter_Glider x1
Adapter_Main_Left x1
Adapter_Main_Right x1
Adapter_Main_Block_Center x1
Adapter_Main_Block_Edge x2 ( one mirrored)
Adapter_Main_Knob x2
Adapter_Slider_Adjust x2
You also need:
3.0x12mm screws x24 (main screws to hold Blocks and slider_adjust, Glider)
M5x20 Bolts with nuts x2 ( these are for the Knobs, you need to countersink the bottom. Or model in a new countersink to the bottom of Main_Left/Right)
M4x20 Bolts with nuts x2 (these go into the middle of Slider_Adjust to dial in the fit).
PS: Might want to use brim on MAIN_LEFT/RIGHT parts.