Milk-crate Car Trunk Anchors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tileable anchors for securing milk crates to trunk floor. Prevents your stuff from sliding around.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
I have some milk crates in the trunk of my car, which would slide around and make a mess when I cornered sharply or punched the gas. My little brother designed me these anchors (and submitted them for a CAD class project!) after which I tweaked them a bit to put more weight on the adhesive pads and allowing easier insertion/removal of the crates.
There are two files - print 3x of the ‘no_nubs’ model and 1x of the ‘nubs’ model for each crate that you want to secure. Cut and stick strips of hook-side hook-and-loop tape to the bottom of the anchors. Place the ‘nubs’ corner for a crate down first, then using your crate as a guide put down the rest of the anchors. I suggest putting the nubs corner in the back so that it's easy to remove the crate by tilting it back and to the side a bit.
Also publishing the step files if you want to remix it to fit slightly different dimensions of crate.
I printed this in Inland PETG, but I think any filament would work fine.