HeyGears Reflex RS RefleXtractor (Fume Extraction) for 3in/80mm Hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3in/80mm fume extraction hose adapter for HeyGears Reflex RS printer
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 75
- Makes
- 0
- Views
- 392
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the Heygears Reflex RS RefleXtractor by @Jerry_Lee to make use of 3in/80mm diameter hoses.
The model was remixed to be smaller, easier to fit on most print beds, and printable in one piece. A few fitment tweaks were made too.
This will let you open the printer almost all of the way, but it's inevitable that a 3in hose will get in the way. You could try to make the model even taller to avoid the door hitting the hose, but then that would be a hassle, if not impossible, to print so this was the best compromise. See picture for example.
Should be printed upside-down (curved side down, it should import that way) with support only necessary from build plate only. Printed on a Bambulab X1C at Extra Draft quality setting (0.28mm layer height) with no issue.
Thanks to @Jerry_Lee for the awesome fume extraction idea!