1 / 3
SONY NP-FZ100 Battery cover — image 1
1 / 3

SONY NP-FZ100 Battery cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€1.02 – €1.25 net (excluding VAT)

For file: Battery_Cover v10_0.2mm_PLA_MINI_1h23m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.14 excluding VAT (range midpoint).

Weight reported by the author
9 g
Print time reported by the author
1.39 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

This is a cover intended to save the spare battery's connectors in the bag

Rating
4.75 / 5
Likes
31
Downloads
369
Makes
5
Views
1,458
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I've printed vertical ('sony' face on the plate) with support only for the top retention overhang, the small guides on both internal borders can be printed without any support.

I tested it with 0.1 layer and with 0.2 layer, 20% infill; with 0.1 the block of the battery inside the guides is a little more smoother 

Tags