1 / 7
Ice hockey goal pegs — image 1
1 / 7

Ice hockey goal pegs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Base for a icehockey goal peg to keep the goal in place.

Rating
5 / 5
Likes
10
Downloads
50
Makes
1
Views
230
Reviews
1

Updated at source:

Model information

License
Standard Digital File License

This is a basic goal post peg I designed to replace the standard pegs used at rinks and for outdoor pond hockey rinks. It takes two 10mm or 1 bolts which thread directly in and need to be sharpened to bite into the ice.

I haven't yet tested it so your mileage may vary, but I expect it should fit based on the measurements I had and it should hold up to a decent amount of abuse if printed correctly since the ice would give away long before the stresses on the plastic cause it to fracture. If you're able to use it give a comment with your feedback!

Make sure you test how easy the net can come off it's position... it shouldn't be so dug in it won't move if a player crashes into it. This file is made freely available and I hold absolutely no liability if you use this and somehow cause an injury or injure yourself.

Tags