Counting matching models…
Der original Drehknopf lässt sich schlecht greifen, erst recht mit Handschuhen. Hier eine verbesserte Version: Nicht glatt sondern geriffelt, etwas größer und mit schwarzem Index. Der Knopf wird einfach auf den alten Knopf gesteckt.…
The base has been redesigned to include the logos for each team playing in the big game on sunday.
Update: Durability photos after 2 months of playing 3-6 games a week. No signs of cracking or damage. They were sliding better after wearing down a bit after 2 weeks. https://imgur.com/a/A28iIbd Update #2: Should have expected this, but…
just a replacement part for a soccer goal for kids. Unfortunately without any product reference but it might help if somebody is searching by key words or so
I acquired my GoalZero secondhand and while using it in the summer I noticed that the buttons kept falling into the case. Each of these buttons has an arm looped over a single stem on the front plate with no endcap. One of the connector…
I printed with TPU 95A but you can use any TPU for this Print Tips: 8% infill if you want the rings, change filament at 6.4mm print the zip ties at 15% infill or use your own.
This is a simple football goal model in two pieces. Other models just didn't look enough like real football goals or needed glue for assembly. Designed for 0.4mm nozzle. No supports needed. I printed the frame in grey and the net in…
I love JS500's nesting box solution. I just wanted to get the dice and goals out of basement so we have an alternative tray. I do not have a fancy dice tower, so this tray fits over the dice tower an humming bird boards. Test printed with…
Four mini hockey pucks (75% scale compared to standard size) with knurled sides and four different mold model variants. Great for tactile and sensory play with playdoh or (kinetic) sand. 🥅 low profile retro style goalie mask 🏒 low profile…
I wanted to commemorate Cole Caufield, the future 50-goal scorer for the Montreal Canadiens. good 3d printing.
This is a custom 3D-printed alignment shim designed specifically for the Mangoal Ford Maverick 4K Dashcam (Model: MGA 032DBA). Its purpose is to correct the factory camera angle, which can otherwise capture an excessive amount of the…
Two simple small models of an ice hockey goalie stick. One has smooth rounded edges, another non smooth sharp edges. Both print without supports and are easily scalable to desired size. The models were created using TinkerCAD and…
A friend asked me if I could make these for him and some of his friends, we went through a few iterations regarding dimensions, screw hole sizes, anchors and more, and I felt like the final product deserved to be put online. The screws we…
A simple bracket designed to slot into the top back center strap. Print it on its side as shown. supports are a good idea with this one because of the curved support. Curves are an issue for most printers when printing an overhang.
This goal was designed by the Robocup Standard Platform League (SPL) Team "Bembelbots" from Goethe-University Frankfurt (Germany). Find out more about them at https://bembelbots.de/ ! Besides the printable files you need some net and…
Gummifüße, werden in die Schraubenlöcher gesteckt. Hält ohne Klebstoff. Filament: TPU polymaker polyflex 95a
USB Kappe, “fast” unverlierbar… Vielleicht einen kleinen Kabelbinder um die Öse legen oder etwas Klebstoff ? Filament: TPU polymaker polyflex 95a
Der original Drehknopf lässt sich schlecht greifen, erst recht mit Handschuhen. Hier eine verbesserte Version: Nicht glatt sondern geriffelt, etwas größer und mit schwarzem Index. Der Knopf wird einfach auf den alten Knopf gesteckt.…
This is a AMS version. Insertion puzzles allow children to develop their motor skills and orientation in the shapes of objects. Individual parts are inserted into their place in the base. The parts fit together beautifully and simply. Can…
Info: The holder is for 1.5 in X 2 in Post-It notes. Fold the Post-It notes into little footballs. Print and Assembly: Any material at 20% infill or more. Any Infill Pattern. No Supports. Print with the pieces standing up as shown in the…
It is highly recommended to print at 90 degrees with supports under the upper tube. This significantly improves the joint strength. Originally made to work with the discstore goaltimate kit:…
I FINALLY found a useable goalie image online and made it into an .stl. Gaps have all been fixed as well as some other attributes, such as a wider stick blade, have been added.
GOAL Z KiK Speed Unloader The GOAL Z is high-security lock from Japan that is popular in locksport. When in a Key-in-knob (KiK) format, the GOAL Z is easy to repin without having to pull the plug and deal with core centering bearings.…
Use this to clip onto your goal Z after removing the top cover and springs. This will allow you to slide out all pins in their correct position for displaying when recording or just to ensure you dont mess up their order or orientation.
GOAL P KiK Speed Unloader The GOAL P is high-security lock from Japan that is popular in locksport. When in a Key-in-knob (KiK) format, the GOAL P is easy to repin without having to pull the plug and deal with core centering bearings.…
To use this as a smart light a Philips hue and smart app can have it light up every time your team scores!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Anycubic Green PLA+ Sunlu Yellow PLA+ Sunlu White This print uses 4 unique filaments Swap Instructions: Start with Black…
Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil Hockey Goalie Template . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall or anything else. The size…
0,2 layer Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil Ice hockey Goalkeeper - Stencil template . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall…
my first model please no hate I'm new to this get creative with how you shoot the footballs
Playmobil goalie stick, puck and puck case. Suitable for Playmobil set Ice Hockey Arena 5068.
This is a simple daily goal tracker (inspired by the one made by Simone Giertz) that uses pegs to keep track of daily goals. You can print pegs for it or alternatively use short M4 bolts. The tracker is the maximum size to fit on the bed…
Magnetic boxes to hold player tokens and food during play as well as a box to hold goal and automata cards. Designed to fit with my full set to completely organize the Wingspan box. Magnets are 6x3mm which actually come out to about…
The Hockey Stick Holders were mounted on a broken stick but could easily be used on a wood plank of directly on the wall. The Wall mounts and Bracket are only necessary if the Holders are to be mounted on a used/broken Goalie Stick.…
The base has been redesigned to include the logos for each team playing in the big game on sunday.
A goal for the simple marble game. https://youtu.be/uT20sJdeaGo
Soccer Goalie Zombie. The hand falling into the ground was a happy accident of failing to merge the wrist to the arm with close enough mm. So when I settled the parts to the plate the hand just fell to square with the plate. Nice. Kept…
A standard playing card sized (63mmx88mm) stencil. I'm using it to track goals on blank playing cards. Two text boxes offer a space to write the task and the reward for completing it.
The Version 3 of my goal tile storage tray with lid will store all of the goal tiles from Base Game, European expansion, Oceana Expansion and Asia expansion, and is designed to fit inside the Bird tower. Yes. I know the Asian goal tiles…
This is a mini soccer goal designed for playing with ping pong balls indoors. It can be easily made with a 3D printer and is compact enough to enjoy in small spaces. Features Grid-style design makes it easy to score and clearly see the…
To Quit is My Goal : Faux Cigarette Dispenser : The Fifth Element. If placed flat you may be able to do a color change at z axis to get the lettering a different color on a mulitplicity of planes.
Hey Guys, here is the Ice Hockey Goal for table top fun with friends. Its my first design here so please ignore ne grid, i had problems to print a perfect grid for this goal. I had print it with the basic PLA settings from Creality Ender…
Hamster Speed Tester Description: Have you ever wondered how fast a hamster can run? Or how many times a day it completes a lap around its wheel? Let’s try to find out! Counter Features: Can be connected to any hamster wheel Displays the…
While printing the original files created by XRP. I noticed that the high goals where loose when connected together, and also needed some extra support.
fits with bauer NME4 SR. For best print use: PC or PETG with 80% fill, automatic supports
This is a simple hockey shooting target for the corners of a 1" PVC pipe goal. We printed ours in PETG with 25% cubic infill. It printed just fine without supports even though the slicer gave a warning.
This is the HexaGoal! A simple tabletop soccer goal with a nice hexagonal pattern to reduce filament cost and also printing time while also being aesthetically pleasing. You can play this with a ball (Files included). I designed this in…
Straightening Clip for Goal Zero Nomad solar panel. This stiffens up the folded section, so that the panel sits more straight. Category: Electronics
Uses with two 5x2 magnets. Magnet socket might require some tolerance adjustment (Still a WIP) These models are prepared for easy two-color printing with only one extruder, no MMU or multi-nozzle setup required. Printer setup In Printer…
This is designed for a senior goalie stick end. The height is 25mm which is the same width as a roll of hockey tape. I have used it on a CCM, Warrior and Sherwood stick and they all seemed to fit snug. I suggest taping around the shaft…
This is a basic goal post peg I designed to replace the standard pegs used at rinks and for outdoor pond hockey rinks. It takes two 10mm or 1 bolts which thread directly in and need to be sharpened to bite into the ice. I haven't yet…
Back in the day we used to make paper triangles and flick them through a friends goal posts he/she made out of their hands. I would suggest printing the ‘football’ out of tpu or some other soft material.
Brankár je vymodelovaný v prostredí TinkerCad podľa modelu panáčika, ktorý je v základnej ponuke. Panáčik bol upravený a doplnený o prvky pre naskrutkovanie malej skrutky k Servo motorčeku, ktorý je ovládaný cez BBC micro:bit.
Potrebovali sme vyššiu bránku pre nášho brankára ( https://www.printables.com/model/1349727-brankar-goalkeeper ). Tento model nám veľmi vyhovoval. Najlepšia tlač bola, keď sa bránka vytlačila naležato.
This rectangle piece is a replacement for the hook and loop strap to fold into to tighten and close a hockey goaltender catch (glove). Feed the leather loop into opening. This piece needs to have edges sanded to round, but otherwise is…
Cartoon-Style Hockey Goalie Figure A stylized goalie model without a helmet, posed in a slight kneeling stance. Available in two versions: With hair Without hair 🔧 Print Settings: Height: 15 cm Layer height: 0.20 mm Walls: 2 Infill: 5%…
A shooting target that clips to the top of a goalie mask. Replaces the stock top buckle on the mask and then the mount slips on over it. I put a bit of glue to really stick the target onto the mount. Don't worry, I got a new cage.…
Slips over the posts of the goal to prevent metal on metal contact for a goalie's skates. Printed out of TPU 95-A with 25% gyroid infill figuring I'd just print more as they broke but they've held up for two seasons worth of practice.…
Update: Durability photos after 2 months of playing 3-6 games a week. No signs of cracking or damage. They were sliding better after wearing down a bit after 2 weeks. https://imgur.com/a/A28iIbd Update #2: Should have expected this, but…
This design is a remix of Metric Maven's Soccer Target over on Maker World: https://makerworld.com/en/models/621959-soccer-target#profileId-546028 These are perfect for dialing in those corner snipes, when printed in TPU these targets are…
My son is a hockey goalie and I thought it would be fun to make him into an action figure. Print according to Dummy 13 specks. just use supports on the hockey based things. Probably should put a brim around the non carded parts too. I…
Use at your own risk. No engineering skill is promised here. This is a mount to allow you to install the 'standard' Chinese downtube battery pack onto a Performer Goal recumbent. It might fit others in their product line, I'm not sure. It…
Build your own indoor or outdoor soccer goals with this easy-to-assemble set! It includes 8 standard wooden dowels (readily available at any hardware store) with a 2.5 cm diameter, and 8 precision-made PLA 3D-printed connectors. Assembly…
Nemesis Retaliation board game insert/organizer using the core box and the sangrevore expansion box. The sangrevore box holds all the enemy miniatures. The core box holds everything else. The insert supports the following: core box…
With this piggy bank, you will have a very simple way to save money, effortlessly and with lots of fun. Piggy bank with the goal of saving €500: Unlike traditional piggy banks, this one has a specific goal of saving €500. There are 100…
Rack ears for a Goalake PS208G POE switch to fit in a 10inch mini rack Printed in PETG, 4 walls, 35% gyroid, ABS would probably also work, but PLA may be too temperature sensitive for this. M3 BHCS approx 6-8mm long should be good for…
My FC Bayern jersey models - covering all players, goalkeepers, and the coach - are printed with planned color changes to capture the club’s iconic look. Printing starts with white (2 mm), followed by red (1 mm), and finishes with white…
field goal for table football printed in 2 peices. the lower one may be a little lose depending on your 3d printer so I included a calabration test for you to make sure it works for your printer. scale the base up or down intill it fits…
My son has a couple of wands from the Wizarding World he wanted to display, so I put together for his birthday after seeing a bunch of other stands similar but not exactly what he was asking for. Got to love the tiny Hedwig! Printed in…
Um das Playmobil Football ein wenig aufzupeppen habe ich dieses Football Tor gemalt und gedruckt, just for fun
This insert is designed to be used in the SG's box as it has greater height. The box closes almost completely but for a few milimeters, the rulebooks height actually To fit everything you tostore each story and it's components in it's…
Great for your hockey fan. Hold your phone, tablet, picture, photo, business card or even hockey card with these engraved hockey pucks. There are two groove widths: 15mm wide or 10mm wide. The larger one holds my iPhone 15 with case…
just a replacement part for a soccer goal for kids. Unfortunately without any product reference but it might help if somebody is searching by key words or so
Das Tor von unserem Kickertisch war kaputt ich habe ein neues gemacht und versucht so nah wie möglich am Original zu bleiben
These are display stands for Player Powers, Solo Achievements, and Public Goals found in the Upgrade Pack for the board game Speakeasy. They make the cards and tiles easily visible on the table and save table space. For storage, the four…
These are a collection of storage and game play components for the board game Speakeasy. Components included are: Two Mobster Tile Trays: One tray holds the A and D Mobster tiles (6 each) and the second holds the B and C Mobster tiles (4…
These are 3D printable goal punch cards designed to help you track progress in a simple, visual way. There are multiple versions included with different numbers of punch holes, so you can choose how many goals or milestones you want to…
I acquired my GoalZero secondhand and while using it in the summer I noticed that the buttons kept falling into the case. Each of these buttons has an arm looped over a single stem on the front plate with no endcap. One of the connector…
Box to store 5 dice and 8 end-of-round goal tiles in a single box. Sufficient for the base game. If you also own Oceania and/or Asia expansion sets: print once for each. I added finger holes for the dice after a trial print to be able to…
To play the game, you must complete a model of a field goal post on both sides of the base. there are small holes to help erect the base poles. there are eight poles total, four for each pole, and in to different sizes. use the larger…
The table soccer we got has one serious problem: every now and then you would hit the goal in an angle that the ball just flies right through the goal box. So I designed a new goal box which has a front plat to catch the ball, and an…
This is an alternative design to the round end goal tracker lids that are a part of Carson Miller's Wingspan Organizer for All Expansions . This can also be used as a standalone goal tracker but it does have space for inset magnets on the…
Anatoliy Trubin : Benfica Goalkeeper In a moment that has immediately entered Champions League lore, Benfica goalkeeper Anatoliy Trubin scored a historic 98th-minute header to secure a 4–2 victory over Real Madrid on January 28, 2026.…
print it in gold or yellow and with skirting and supports. use exacto to remove from skirting and supports
I printed with TPU 95A but you can use any TPU for this Print Tips: 8% infill if you want the rings, change filament at 6.4mm print the zip ties at 15% infill or use your own.
