1 / 3
MK4 Filament Guide Goal Post — image 1
1 / 3

MK4 Filament Guide Goal Post

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Yet another filament guide. This version holds filament at the top of your MK4 enabling full motion of the extruder.

Rating
0 / 5
Likes
4
Downloads
32
Makes
0
Views
199
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I created this model to route the filament my extruder from my filament mounted in dry box model here. With this model, the filament moves freely with the extruder, does not get caught on anything, and supports the full range in all three axis.

Note in the photos you might notice a second pair of brackets - that is my LED light brackets, not related to this model, but it is nice that they work together. 

How to use:

  1. Install the bracket on the printer, be sure the clips are facing towards you so the extruder won't contact the bracket. 
  2. Cut a PTFE tube so that it was long enough to reach from the dry box, through the bracket reaching the far left and right extruder positions. 
  3. Load filament through the PTFE tube and into the extruder when loading filament.

Printing Directions: I printed this with auto generated supports in PETG, with 4 permitters and 15% infill. My settings are in the attached 3mf file. The supports were easy to remove. I considered making this print in two parts to avoid the supports, but decided I'd rather avoid the assembly. 

I've included the OpenSCAD model so you can modify if you'd like.

Tags