Bobbin Holder - L Size - Commercial Embroidery - Melco
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.10 – €1.35 net (excluding VAT)
For file: Melco Bobbin Storage Holder_0.4n_0.2mm_PLA_MK4S_1h11m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.22 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 1.19 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a bobbin holder for L Size commercial embroidery bobbins.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 58
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
This is a bobbin holder for a size L commercial embroidery machine bobbin. It holds about a dozen pre-wound bobbins.
I printed the teal colored one in PETG and the files posted are for a PLA version. Either would be fine. Support material is required. I did not need a brim but it may not be a bad idea to add one if adhesion becomes an issue.
I adhere coin magnets to the back surface using epoxy but I figure super glue, CA glue, or hot glue would also probably work. Then I can set the bobbin holder up on a nearby piece of metal. Note: Melco's have a lot of cast aluminum parts and magnets will not stick. It will need to be something like steel for it to stick too. This could be a cabinet, a shelf, a metal plate zip tied to something, etc.