1 / 6
Tripod Feet Remix for Insta360 Selfie Stick — image 1
1 / 6

Tripod Feet Remix for Insta360 Selfie Stick

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tripod Feet for Insta360 Selfie Stick or Most Monopods with more space for a ¼ inch metal screw

Rating
0 / 5
Likes
11
Downloads
65
Makes
0
Views
488
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a tripod for e.g. the Insta360 invisible selfie stick or any other camera mount with a standard ¼ inch screw mount. It's a remix of @OurAngryBadger very good remix.

Required Parts

  • 3× M3x16mm screws
  • 3× M3 nut
  • 1× ¼ inch screw, 16-18mm long

 

Printing

  • 0.6mm nozzle recommended, but 0.4mm, to 0.8mm should all be fine
  • layer height: 0.2mm to 0.3mm  (I used 0.3mm with great success)
  • wall strength/perimeters: ≥4 with 0.6mm nozzle or ≥6 with 0.4mm nozzle 
  • 25%-30% infill, honeycomb pattern
  • top layers: 5
  • bottom layers: 5

Assembly

  1. screw in the ¼inch screw from below for just a few mm
  2. make a sling with the lanyard and hook the screw
  3. screw the ¼inch screw in tightly, while keeping the lanyard ad the cut-out. This way, the screw should become flush with the connector
  4. one by one, add the feet and affix them with M3 screw and nut.

 

Tags