Dalke Eyestalk Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A couple of years ago I came into possession of a dead projector. I took it apart for fun and as I did so I thought, I…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
A couple of years ago I came into possession of a dead projector. I took it apart for fun and as I did so I thought, I should use the lens to make a Dalek eye-stalk. So I did. Please note that this is in no way accurate. I designed it to work with the projector lens and a spare piece of conduit that I had. I don't profess it to be anything other than an imitation. I was not going for prop accuracy, just fun. It's not even the correct scale its scaled to look ~right with an old Eiki projector lens. I've hesitated to even post this, Sitting on the files for two years, because I know how [obsessive] prop builders can get.
Other than the 3d printed parts I used the following items: 3/4 in electrical conduit Projector Lens Various Wires Blue LEDs 3 Hex Screws
Category: Props