1,262 models
I first posted this on Thingiverse on 1/23/2022. A couple of copies were posted here as original work (without attribution) and were taken down, so I've decided to also post my original design here. Print using 0.4mm line width and no…
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
First layer test surface that uses the whole printbed 210x250mm with 0.2 mm height. Can be used to visualize warped / uneven printbeds. The included gcode has the ooze free startcode sequence. Happy printing! Print instructions Ooze free…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Whole balls and half balls included ALL 25% Scale Recemented. 20% infill, the more the heavier These are just for fun, and not intended do be used as real use balls. i use them to throw upwards laying down if i'm bored and thinking of new…
Print approx. €10.24–€12.51 excl. taxPreliminary estimate for one variant
A little sculpture of a Dalek from Dr. Who. Made it for a school assignment. It was printed with PLA on a Prusa Mini. Plunger and blaster pieces can be fragile when taking off support.
Print approx. €10.01–€12.23 excl. taxPreliminary estimate for one variant
Percussion Frog 90% infill, WITH SUPPORT, only in the mouth In Prusa Slicer, you can now easily add support manually with the brush. But it's still not that easy. So here are my .3mf-files (for the MK4). Two versions: Original size and…
Print approx. €5.50–€6.72 excl. taxPreliminary estimate for one variant
There are three parts to this model. Box base with towers marked with ring size. There is .2mm clearance at the tower base to the side of the ring size inside diameter (ID) or .4mm total clearance at the tower base to the ring ID. Rings…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
I was looking for a carrying case for my BetaFPV Meteor 75 Pro FPV Quadcopter that holdes my drone as well as accessories like batteries, charger, tools, props and a powerbank. Since this is very specific, I didn't find anything out there…
Print approx. €6.52–€7.96 excl. taxPreliminary estimate for one variant
A caricature of a Cyberman from Doctor Who Update: I have added a multicolor version for AMS, however this is untested as I don't have an AMS to test it out. If you do try printing this model let me know how it went.. Thank you.
Print approx. €4.81–€5.88 excl. taxPreliminary estimate for one variant
A caricature of a scary Weeping Angel from Doctor Who
Print approx. €5.26–€6.43 excl. taxPreliminary estimate for one variant
Designed with minimal tolerance and print-in-place hinges. The corners opposite the hinges might stick together and need a good push after printing. Print with thinner layers if they stick together too hard. Print with 3 perimeters for…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Sculpture made from a concept created by me, based on the comic book character, Batman who laughs, is an alternative version of our favorite hero, where he is a villain. a kind of function between the batman and the joke
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
A caricature of a Weeping Angel hiding, from Doctor Who
Print approx. €3.70–€4.53 excl. taxPreliminary estimate for one variant
Cindy-Lou Who As seen in the original 1966 animated version of Dr. Seuss's "How the Grinch Stole Christmas" She can also be hung as an ornament. Single extruder multi-color print Layer one: White Layer two: Yellow Layer three: Pink Layer…
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant
Dr Who Confession Dial Find your Dalek Here: Dalek by Peter Farell | Printables Store
Print approx. €5.79–€7.08 excl. taxPreliminary estimate for one variant
This spring is tapered so that it can compress down into a thin slice. That will preserve more internal air volume for your successful desktop whomp LEO insertions. It prints fast and decent without supports. It has been whomp-tested 3…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Printing Notes: I reduced the perimeters from 3 to 2 to make the text look better. Printed at 0.10mm height. Filament used: Overture Matte Pink PLA Post print additional work: I filled in the lettering with the some nail polish. Make sure…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
This is a Dr Who police box switch plate with a generous opening to allow all inner switch bezels. It has extruded letters so you can paint by hand or use different color filament for the letters at the starting layer. Print instructions…
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for one variant
A caricature of Peter Capaldi as the 12th Doctor Update: Added a multi color version for those with a Bambu AMS or two. This is an untested version as I don't currently have an AMS system. Bambu-A1-Multi-Color-12th-Doctor.3mf is the file…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
Remix which has a 5mm bottom. (twice the height of the original in total) & wider flaps. 30mm outside width. It feels a lot more solid and doesn't bend. The original flaps felt a bit to small so I enlarged the width from 20.4 to 30mm.…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
This is specifically for the TOUGHBUILT C550, C600, C650, C700 sawhorses. Držiak pre stavebné kozy TOUGHBUILT C550, C600, C650, C700. TOUGHBUILT C550 TOUGHBUILT C600 TOUGHBUILT C650 TOUGHBUILT C700
Print approx. €3.00–€3.66 excl. taxPreliminary estimate for PETGSource material: PET
Being a retooling and scale accurate to the action figures, this model utilizes both Ellindsey's model aesthetics and snap fits, as well as Audrey2's incredible Dalek model details. For both the OPEN and CLOSED midsection versions of the…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
This is a very straight forward print with the ability to change colors and size to your liking.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Caricature of Karen Gillan as Amy Pond from Doctor Who (the 11th doctor)
Print approx. €3.05–€3.72 excl. taxPreliminary estimate for one variant
A box for storing a VIFLY WhoopStore 1s LiPo charger (https://www.viflydrone.com/whoopstor.html) together with a short cable (the included USB-C cable or similar). The lid comes in two versions, with and without text ("VIFLY WhoopStor")…
Print approx. €3.34–€4.09 excl. taxPreliminary estimate for one variant
Whomp King / Super Mario 64 DSI Ill be doing another version soon. This one sucks.
Print approx. €5.19–€6.35 excl. taxPreliminary estimate for PETGSource material: PET
A caricature of Elisabeth Sladen as Sarah Jayne Smith from Doctor Who (the 3rd doctor)
Print approx. €2.98–€3.65 excl. taxPreliminary estimate for one variant
This is a case/holder for a DIY LED tinywhoop gate. It's running a WS2812B LED strip controlled by an Arduino board. Due to the design, the case will also hold the gate upright. Nothing else needed. These things are pretty light though.…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
This small box uses 4 5x10mm cylinder neodymium magnets (printed into parts) and 5cm of 1mm wire for the hinge. It should work with most 300mah batteries such as TINY WHOOP HV , NewBeeDrone Nitro Nectar HV , Tattu HV and others (holes in…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for PETGSource material: PET
I've included the original .stl as well as the colour change versions from PrusaSlicer both with and without ‘ironing’.
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
These two flower pots were made for each other. You can print the pots themselves, or you can print the molds. If you print the molds, use a flexible material or a material you can make pliable enough to pull out the casted pot. I casted…
Print approx. €11.99–€14.66 excl. taxPreliminary estimate for PETGSource material: PET
Isolierband kann man noch um den Knopf damit sie noch höher fliegt.
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
A simple screw and bitholder you can attach to a Einhell screwdriver using a M4*20mm screw. You have to pause the print at a certain layerheight and put 3-4 Neodym 10*3mm Magnets in.
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
UPDATE 2: I've included two new models for those looking to print the parts individually (and then use a drop of glue to hold together). The files are: Individual-Arrow_Only & Individual-Case_Only (which actually has the arrow hole sized…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
A unique model of an off-road vehicle, inspired by the dream car of everyone - who wouldn't like to dive trough the desert with the G63 AMG 6x6? Now you can too, at least in the sandbox. The icing on the cake: make it as long as the…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Designed for multi-material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Print approx. €12.92–€15.79 excl. taxPreliminary estimate for one variant
I made this model in Tinkercad from scratch. It prints in three pieces. The top roof is done so you can install a blue led on it while allowing access inside the tardis. Print multiple windows with the one provided. I used blue PLA…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I modified the base to channel the air better and added a handle for stabilizty. All other hardware per LoboCNC original design. See his URL for projectiles: https://www.printables.com/model/405948-whomp-squadron-and-launcher
Print approx. €6.62–€8.09 excl. taxPreliminary estimate for one variant
i wanted to make some decks that were themed for the new doctor who commander decks as well as making making the decks more easily stackable, in my variants there are just plain old stackable versions without any logos/sides on them for…
Print approx. €11.18–€13.66 excl. taxPreliminary estimate for one variant
Simple GoPro mount for the iFlight BumbleBee Cinewhoop. Made with PLA/PLA+.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
A plaque and pin of the U.N.I.T. emblem from Doctor Who. (UNified Intelligence Taskforce). I've included the colour change .gcode from Prusa Slicer.
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
Universal V-Block Adapters for Workshop Stands (with TPU Cushioned Pads) Upgrade your standard workshop stands or sawhorses ( 25x25 mm) with these heavy-duty V-Block (Prism) Adapters . Designed specifically for general workshop tasks…
Print approx. €12.57–€15.36 excl. taxPreliminary estimate for PETGSource material: PET
When someone points an accusatory finger at the accused, do the three fingers in the fist in fact point at the real culprit? Seems a good comment for a self-centered relative or acquaintance. This file can be used as a bookmark. Printed…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant
A insert for the card game "Who did it?" or in German "Krasse Kacke".
Print approx. €3.27–€3.99 excl. taxPreliminary estimate for one variant
This model is based on the Trilogic game ( Towers of Hanoi ) created by The Toymaker in Dr Who. The Doctor is forced to play this game in episodes The Celestial Toyroom , The Hall of Dolls , The Dancing Floor , and The Final Test from…
Print approx. €7.45–€9.10 excl. taxPreliminary estimate for one variant
This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
Just mash on the plunger and Whoosh! Launches two different gliders for long-range soaring and a rocket for sky-high trajectories. The launch angle adjusts with a simple screw that is hollowed out for airflow. This is a complete re-design…
This is one of those busts with arms. I know there's mixed opinions about them, but in the case of TBWL I think they are almost a must. (There is however a version without sockets for the arms). If you want to print the entire thing the…
Guess Who - Travel game edition, but with flaps instead of the push mechanism of the retail version. The card size is compatible to the retail travel game, but this remix features 24 characters instead of just 20. As rods for the hinges…
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Check those accessories for the PickleWhoop by Milo Perriand (Full GoPro mount,…
I remixed the scaled remix to print this model whole, vertically. It turned out beautiful, so I wanted to share it. No assembly necessary! Due to the remix having pin holes, this model still had those internally but it doesn't affect…
IGNORE this version, we're onto V3 already! Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint As you can see in the images above the model comes with a seperate base and a very small amount…
Some whoops that can be made as long or short as you want them to be. The ends are reversible, and you can add as many middle sections between them as you need. They have holes to add the connectors in to help keep the pieces from moving…
Many similar clearance tests are available here and elsewhere in internet. I could however not find one that goes tighter than 0.1 mm so modeled one up in Fusion 360. I have been able to tune my printer (CREALITY CR-6 SE with Dragon…
Add the gentle giants from the Forbidden West! This machine is to scale with the official board game and stands on a 80mm base. I printed attached to the base for stability but a detached version is also available. Note that the tail dips…
he exterior structure represents Mt. Crumpit , the snowy, treacherous mountain where the Grinch lives, looking down upon the town below. This perspective is a beautiful way to capture the main conflict of the story.Contained within the…
This stomp rocket/glider combo has an angled launch tube, making it great for inter-cubicle warfare. Providing, of course, everyone is wearing safety glasses. Truth be told, the glider is a little on the heavy side, so don't expect long,…
Print in TPU, organic tree supports. I weighed it at 1.7g. There's room to make it lighter for sure, but I also want it durable. Feel free to give me feedback!
Saraswati is the hindu goddess of knowledge, wisdom, learning, music and fine arts. She is seen carrying a “Veena” which is a musical instrument. This is a symbolic meaning which means to tune oneself into their own world of self…
Case for the BetaFPV Air65 TinyWhoop
This deckbox is made of three main parts, which assemble by using 16 neodym magnets (6*3mm). UPDATE : Added some additional parts (window, top and front text panels), which can be glued (otherwise, you can try to paint the white parts of…
If you like this model, please consider a donation: Buy me a coffee link Print Settings Layer Height: 0.2 Wall Line Count: 4 Top/Bottom Layers: 5 Infill: 100% Other Parts: 8520 Brushed Motors Flight Controller (Mount was designed for…
Check out my youtube video for context and how I assemble it. Checkout LureForge , the beginner friendly lure making app, create your lure, make sure it floats/sinks, and export it as an STL or a 2D template for wood carving. Join my…
Just a simple 65mm Tiny whoop frame, planning on building more versions that are more robust and lightweight versions
Just a simple 75mm Tiny whoop frame
About the Model: STLs of full body and parts with aligning pins included. making of video: https://youtu.be/7cmkdSqncbo About the Original Sculpture: Ardhanarishvara Tiruvenkadu, Thanjavur District. Height 101 cm. Around 11th Century AD.…
Features Fully customisable to suit any diameter of PVC pipe and to suit your own printer tolerances. Accurately calculates the length you need to cut your PVC pipe to in order to achieve a specific dimension (see OpenSCAD console…
whole rpg from animal company vry
-------------------------------------- V3.1 IS HERE--------------------------------------- C hangelog: [2024/12/31] - v3.1 partial upgrade Improved power input cutout fitment Improved exhaust fan cutout Reduced pusher gap Increased width…
Take your rocket to new heights This remix of the Desktop Whomp Rocket by LoboCNC makes use of a redesigned base and some bellows that you will print in TPU. This not only allows for fist pounding, foot stomping action but can actually…
More info here for kits and BNF Print the cam holders in TPU, 0.3mm height, 0.48mm width. F75 Pro Max Ducts: Experimental, print at your own risk 😛 Print in PETG, PA or HIPS; any high impact plastic should do. Then insert the struts into…
hello~ It's a toy that makes a mouse come out when a cat presses a button. It works on a seesaw principle. The rats on the left and right are the same. Thank you. ps. There are contents on my blog that play with 3D printed cat toys.…
Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it
I wanted to have a neat way to display and store my drones on my shelf, but i wanted it to be modular and easy to print. I tried to find something fitting online, but couldn't find anything that really met my expectations, so i hopped…
I loved the desktop whomp rocket, but preferred the remix with the flex/TPU filament air pump since it was easier to use and launched farther in my testing. But I also wanted the angled launcher, since it was safer for kids since it is…
⚫SKARO DALEK⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every Saturday! And…
I tried to design an indestructible frame taking advantage of Prusa XL multi material print capabilities. My configuration: LIPO: 2S 450mah FC: Flywoo GOKU F405 HD 1-2S ELR AIO V2 Motors: HGLRC SPECTRE 1202.5 Motore Brushless 11000KV…
Tired of snapping carbon fiber arms or cracking rigid plastic frames during basement laps or sidewalk proximity flying? This 75mm micro frame is designed specifically for durability and flexibility, utilizing the unique properties of TPU…
⚫ Tardis 13th Doctor ⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every…
Optimised for printing with a .4 nozzle with a line width of 0.4 in PETG (Dry). Any layer height should be fine, I used 0.28. The adapters should be a snug fit and slide in without a lot of force, if they are too tight or too loose try…
In case somebody needs a 3d model of mob7 frame for making custom canopy or whatever. The model is accurate to the production frame except symmetrical motor arms and straight duct profile.
Prop guard for your 5 inch :) Holes on the sides, if you want to add rigidity by printing connecting rods. Mirror to get the other side. Some frames have the motor mount holes angled relative to the frame, if so let me know. Category: R/C…
12th Doctor Who 12th Sonic Screwdriver Inland Filament Used: Cyan Blue Silk Dual Color Silk Gold-Grey Silver PLA Inland Filament on Amazon Printer Settings: Nozzle Temp: 215° Bed Temp: 60° Organic Supports Used Everywhere 15% Infill Print…
⚫ Doctor Who K·9 ⚫ ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can look forward for. ■ YouTube ➔ https://www.youtube.com/c/MrHanjak2017 ■ Video 🔳 INFO 🔳 ■ Steel sheet ➔ PEI ■ Nozzle ➔ 0.4 ■ Material ➔ PLA ■ Infill ➔…
Required parts: Sim Removal Tool (What I used) https://www.amazon.com/dp/B099ZHQZ2F?psc=1&ref=ppx_yo2ov_dt_b_product_details https://www.amazon.com/MMOBIEL-Card-Removal-Smartphones-Ejector/dp/B097RDGRR2…
Material: PETG / ASA / PLA+ Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Kein zusätzliches Material erforderlich / no additional material required Siehe auch / see also:…
remix with screw hole Print Settings Printer: Crealety Ender 3 V2 Rafts: No Supports: No Infill: 20 Filament: 3D Jack ECO Pla PLA Black Category: Mobile Phone
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Updates 2026/09/14 : added frame STEP files + DJI O4 Wide cam mount 2025/01/16 :…
Print your own Tiny Whoop Gates! I hope this serves you well and feel free to give me any feedback or ideas for improvements. Have fun! Main loop This split into several parts (e.g. 4 or 6). These are just stuck together and hold well.…
There are four different holders with five different positions on the wall (20 stls in total). The holder types: 12 mm holes for 10 pliers 18 mm holes for 8 pliers 22 mm holes for 7 pliers combo with 5 pcs with 12 mm, two with 18 mm and…
the camera mount from the five33 whoop These mounts are designed and used by Team BlueEyes in the Italian Whoop League 30 deg 35 deg 37 deg 40 deg print settings: infill: 100% use tree supports fillament: tpu .2 layer also on thingiverse:…
Supports are not needed. Print 30 pictures and 24 of your choice glue to the flaps. Connect flaps to the main board using filament from a spool and then glue the ends or use heatgun to melt the ends. The goal is to guess the opponents…
THIS IS A 65mm MICRO WITH 40mm PROPS THAT WEIGHS 21g AWG!!!!!!!!!!!!! Back in the day when Tiny Whoops hit the market the average weight was around 21-22g with brushed motors and 31mm props. It's crazy to think in just a few years we can…
This project was actually just for fun....but it ended up flying (unexpectedly) very well. All you need additionally are 14 pieces of m3 18mm nylon standoffs. My Configuration: Stack (20x20): Mamba F405 MINI MK2 + F30A, AKK FX3-Ultimate +…
Another comedy "Do Not Touch" warning sign, multi-colour print, printed in ZIRO PLA Glitter Twinkling Red, ZIRO PLA Twinkling Black, and Sunlu Matte white PLA. For more funny signs see my (growing) collection of them here -…
Made those two versions for my whoops to be able to just toss them in my FPV backpack. The 65mm version requires 6x M3x20mm screws. The 75mm version requires 6x M3x30mm screws. The parts called multipart are STLs with multiple bodies in…
This is a bed level test for the whole bed of the SV06, make sure to disable the purge line in your G-Code Start command and probably turn off the skirt or whatever adhesion type you're using as well. Make sure that the PEI sheet fits…
![Doctor Who - Post Time War Dalek [2012] ★SKARO DALEK★](https://media.printables.com/media/prints/75799/images/7871489_a41a8051-5d2e-4fd8-99e1-5c8b16749666_987f6701-daaf-43a1-8701-4326e696a9f1/gg1.png)
![SKADIS pliers holder for the whole wall [Držák na kleště]](https://media.printables.com/media/prints/432127/images/3578117_39bf1092-8e38-4c8f-8c82-c3c614bc878e/51_13.jpg)
