The Ultimate Lego Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An upsized version of Lego Sorter Box by Frikarte3D. Added a build platform to the case and internal trays.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 88
- Makes
- 0
- Views
- 789
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Design meant for single extruder printers.
Material - PLA
Layer Height - 0.3 to 0.4 mm
Perimeters - 3
Infill - 15% gyroid
Supports - Used organic supports on the trays only
For contrasting colors shown, change filament color at these heights
Top of Case (to highlight build platform) - 2.9 mm
Bottom of Case (to highlight LEGO logo) - .9 mm and 1.7 mm
Assembly requires M3 screws nuts
Latches/Handles - (2) M3 x 40 mm screws & (2) nuts
Hinges - (2) M3 x 30 mm screws & (2) nuts
Recommend using Prusa nut pulling technique to set nuts