1 / 1
Prusa CORE One/+ MMU3 Buffer left side mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa CORE One MMU3 Buffer left side mount (20x6x2mm Magnet)
- Rating
- 4.8 / 5
- Likes
- 69
- Downloads
- 268
- Makes
- 10
- Views
- 1,839
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
Print instructions:
Download the latest PrusaSlicer and use the following settings*:
- Print settings: 0.20mm STRUCTUAL
- Filament: PETG (tested on Prusament)
- 15% Grid infill
Additional parts required:
- 12x Magnets 20x6x2mm or Magnets 20x6x2mm
* Note that print settings are recommended, but you can experiment with your own.
The prints were tested on the Prusa CORE One