Magnetic Vent Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic 90º adapter to run 4" ducting through a screen and route ventilation out of a skylight type window.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
I have this weird skylight type window I needed to run my Anycubic Photon Mono M5s Pro ventilation through, I designed two connectors for the inside, because I was originally going to be using one of those AC window adapters, essentially a board, so I made one to be screwed into a flat surface, then wound up not using the board, so I made a second internal adapter that fits quite snuggly in the 4" dryer duct I am using. It wound up working really well so I thought I would throw it up here in case anyone else is trying to vent out of a similar window.
I designed the parts to be easy to print and glue together, there are holes for 12 8mm x 3mm neodymium magnets, which is totally overkill but I wanted it to be able to hold the weight of the ducting.