Magnetic Vent Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic 90º adapter to run 4" ducting through a screen and route ventilation out of a skylight type window.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I have this weird skylight type window I needed to run my Anycubic Photon Mono M5s Pro ventilation through, I designed two connectors for the inside, because I was originally going to be using one of those AC window adapters, essentially a board, so I made one to be screwed into a flat surface, then wound up not using the board, so I made a second internal adapter that fits quite snuggly in the 4" dryer duct I am using. It wound up working really well so I thought I would throw it up here in case anyone else is trying to vent out of a similar window.
I designed the parts to be easy to print and glue together, there are holes for 12 8mm x 3mm neodymium magnets, which is totally overkill but I wanted it to be able to hold the weight of the ducting.