Desiccant Canister
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A canister for holding desiccant beads that fits in the centre of filament spools
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
A canister for holding desiccant beads that can fit into the centre of filament spools.
So far I have only made canisters for spools with 52mm and 55mm diameter centres. Each size has two different lids. One that is meant to be paired with a hygrometer and one without. I have also made a funnel for filling them.
The desiccant beads should be 3mm or larger so they don't slip through the holes. I have been using activated alumina for the desiccant and so far it has been working quite a bit better than silica gel.
Because the hygrometers are mounted inside the canister, they will read low for a while until the desiccant and air reach equilibrium.
Hygrometers - https://www.amazon.ca/dp/B07BLY177S?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
Activated Alumina- https://www.amazon.ca/dp/B0B81VM24F?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1