1 / 3
Jupiter 9 LTM M39 Lens Hood
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slip-on lens hood for the LTM/M39 version of the Russian Jupiter 9 85mm F2 lens
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This lens is really prone to reduced contrast from stray light, so I made the hood a bit longer.
I only tested this on the Leica Thread Mount (M39 thread) version of the lens. This slips on the outside of the lens and holds on with friction, so if you print this in PETG or ABS, you need to account for shrinkage or sand it until it fits.
The M42 version has the same 49mm filter thread, so it might work, but I haven't tested it.
Print with 3 perimeters. No supports needed.