Counting matching models…
It is designed for a Voltmeter with the Sizes and i left a cut out for the cables. width: 26mm hight: deepth: 70mm Printing: Speed: 60 Material: PLA Infill: 10% Hexagon Time: 2 Hours 20 mins Print Settings Printer Brand: Creality Printer:…
A simple, no-frills 3D-printed stand that holds laundry detergent bottles at an angle to reduce waste—easy to design, fast to print, and solves a common everyday problem with minimal material.
My takes on the creatures from Ghosts of Saltmarsh are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the…
This is a part that holds this small voltmeters: https://s.click.aliexpress.com/e/_dZBPU7C (Affiliate link) I used it to modify a lithium battery charger, you can see how to in this video: Designed in Onshape, here is the link if you want…
Designed to fit all the generic 0.28" sized panel-mount modules available online. Extra space in the case is for project wiring. Use 2 M3x12 to attach lid and #6 screws to mount the case. Print lid face down and case back down. Example…
We had a difficult time getting the files to make a spare dust shoe, so we downloaded them from OnShape, resized them to the appropriate size (100%), and re-exported them in a ready-to-print size. They're easier to find, download, and 3D…
For an electronics project, I picked up some small and inexpensive voltage meters (VM). They include tiny mounting tabs on either side which take very small screws and leave the meter exposed and vulnerable to damage. This two-piece…
This is my build of the Wicked Device Angular Clock , an Arduino-based PCB which drives three voltmeters to display hours, minutes, and seconds. It uses the square “quadrant” style of panel meter, and each meter is in its own case,…
This mini-voltmeter case features a 7-segment LED display with segment sizes approximately 10 x 23 mm. The overall dimensions, including the board, are 11 x 33 mm. Mini-Voltmeter Case Display : 7-segment LED Segment Size : Approximately…
I am seriously bothered from lacking voltmeters in blasters, especially in blasters with low capacity batteries like the nightingale. I couldnt find a file for a frame and didnt want to cut the shell so i modeled a new battery door with a…
Should work for lenses with the same filter size
RobotDyn LM2596 Step-Down module case. The converter has a button, this isn't implemented in this design yet. This is a remix from the following item: https://www.thingiverse.com/thing:4056842 It should fit this LM2596 from RobotDyn but…
These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…
This is a case for a mini voltage display. It fits Amazon product # B079N98PY4 described as: HiLetgo 5pcs Voltage Meter 3 Wire 0.36" DC 0~30V Digital Voltmeter Gauge Tester Red LED Display Panel Mount Car Motorcycle Battery Monitor Led…
Case for DSN-VC288 voltmeter-ampere meter. The hole is for the DC Power Connector 3-Pin 5.5 x 2.1mm (https://a.aliexpress.com/_EJAbB9W) 0.2 mm
Quick modded from thing:103601 basic model as a ISO reminder for Leica ltm and similar cameras. 50 to 800 printed just fine 1600 and 3200 you may need to setup your printer for small details. Category: Camera
I made this socket for adding a voltmeter and USB charger for my Corsa C. It snaps into place. The voltmeter is one of those chinese ones that also includes 2 fast charging usb sockets and I just connected it in paralell with the lighter.…
Prints with no supports, pushes into plugs.
These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…
For Mini LCD C 2.4-30V Car LED Panel 3-Digital Display Voltmeter Housing for cable mounting
I bought quite a few broken beyond repair minox 35's and decded to take a couple apart to attach them to a leica body. You need the tiny screws from the minox that hold the lens on. No guarantees.
This is a model of a heat pump which can be used as a desktop stand for business cards or something else. You dont need a MultiMaterial Setup to print this. Just one filament switch within the process. Its made out of 4 parts. Print the…
This is a common, cheap, item on eBay or AliExpress thats a generic facia for 12v plugs and USB. i wanted this item put onto a wooden box to go in my shed to keep a monitor on my leisure battery & the solar panel that charges it plugs…
This enclosure for those common cheap mini voltmeters lets you clip them into the power rail of your breadboard. Step 1: Solder two wires to the board (combine red+yellow to a single wire, this way you don't need a separate power line,…
Update - Dec - 28 - 2021 After one and a half years doing those conversions and many successful lenses I'm now pretty confident with this design. The M36 thread that act as the focus helical has been redesigned now with a dual start 1.5mm…
A simple easy to print voltmeter support for your dash no drilling no fuss just some assembly double sided adhesive tape hole is 30mm dimensions are: W x H x D (width, height, deepth) 50mm x 70mm x 50mm voltmeter:…
An S-360-12 PSU cover with voltmeter, switch and xt60 plugs ; with removable access cover. Uses M3 screws and heat-serts for the cover. Note: I designed this to fit an older voltmeter I had that has the two mounting tabs offset towards…
Designed to be an easy way to hold my AltMill touch plate lead, and spindle wrenches. The back is designed to house a washer, or other piece of metal, for the magnetic lead to connect to. Uses two M6 screws and roll in M6 t-nuts to attach…
Take your DIY electronics projects to the next level with this functional and protective shell. Specifically designed for the popular XL4015 module with integrated voltmeter , this case transforms a bare circuit board into a finished,…
A neat enclosure for digital voltmeters, hole size 45 x 27mm. Keeps the display in a nice angle, uses 4 M3 brass inserts and 4 M3 bolts.
This is a voltmeter "DC Power Detector", holder mount on DIN rail - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich urządzeń, które posiadam Zapraszam…
This is a quick print. The build plate hangs loosely over the vat to allow for additional resin drainage. Fits my Anycubic 4K Mono nicely. I printed this in PLA.
Description : This instrument has some useful functions for Arduino users. Besides being a voltmeter with data logging, it could answer questions like "how much voltage falls on the LED at 10mA current?" or "is this an IR LED or what?" by…
Remixed to panel mount to use with my battery pack / solar generator Category: Electronics
I have couple of inexpensive voltmeters located in my “work” areas. One is a current model Harbor Freight multimeter and has an eyelet to hang on a tool organizer or pegboard hook. The other is for a Sunpro (Actron) CP7674 multimeter that…
The closed loop stepper motors have 12 wires on them in 2 different locations. this cover protects them from accidently bumping into them. works great on the Sienci AltMill
This is a simple voltmeter housing. These voltmeters are widely available on AliExpress or eBay. Their display size is typically 2.4cm x 1.4 cm (0.36 inch). The mounting holes are 28mm apart. You will need either 2 small screws or some…
Requires M3 45mm long bolts to mount to the super simple slide on only DIN rail adapter. Both parts print with no supports. Print the DIN rail on its side, and the case face up. A FreeCAD file has been provided for the DIN rail adapter.…
an enclosure for the cheap LED Volt-/Amperemeter. you need: Volt-/Amperemeter 3 Banana-Jacks 1 7x7 on/off switch (optional) 1 JST-Connector (optional) circuit board for easy switch and connector mounting wiring: OpenScad file included, so…
BOM Heat insert M3x4x5 4-5pcs M3 Counter sunk screws laying around your floor and…up to 5M length 6mm width belt! Wider ver is under consideration. Update: Added variation for 7mm-10mm belt! Update: Added covers! Update: Added STEP…
I was looking for an enclosure/holder for a voltmeter and temperature display, but couldn't find anything existing that was what I was looking for. I built these to screw onto the side of my printer enclosure (Stuva cabinet from IKEA). To…
You can use it from bottom or top down. The Ampmeter will fit from both sides. Thickness is 20 mm, the frame is not closed. You are able to remove the ampmeter in both directions by rotating it 90° (very comfortable if the cables are…
This small digital voltmeter is very low cost and often used in Arduino projects. This model will help with the design of the 3D box hole for the voltmeter display. EDA tool: OpenSCAD Print Settings Printer: Prusa Mini Rafts: Doesn't…
I appologize. This is a remix but I cannot find the printout that inspired me. Sorry for that
This is a simple mounting frame designed to install a 0.28″ mini digital voltmeter neatly into a case or enclosure. It provides a clean and secure fit and makes it easier to mount the display without glue or improvised solutions. The…
This is an adapter designed to mount lenses from cheap broken Point & Shoot cameras on rangefinder cameras that use the M39/LTM mount like old Leicas. The design is printed in multiple parts which are correctly oriented for ease of use.…
Custom Box for Digital Voltmeter & Ammeter Fast and easy print to add a box to your cheap digital voltmeter and ammeter. For my setup, I used: 2 x M3 screws (6mm or 8mm) 5 x 4mm banana plugs 5 x M4 Binding Post (3 red and 2 black) 20 AWG…
Vented Altmill Stepper Motor Cover to help prevent damage to the motor & cabling.
Printed from PETG. This is a 2 piece, cover and base voltmeter enclosure. It is connected using M3 x 18 SHCS by self tapping. This will be used on a bike mount. Print instructions PETG settings, 1.75 filament, .4 mm nozzle, Prusa MK3S+…
Tiny Voltmeter Case I designed this case to suit the miniature LED voltmeter displays readily available on Amazon and Chinese sites. This is the description from Amazon. 0.28 Inch Mini Digital Voltmeter with 7 Segment LED Display 2.5V -…
This model for analog voltmeter type 91C4 has a 5.2 mm connector also has a button to change the range or it can be used to turn the device on or off in order to change the range I used two resistors
Here is a box for a DC boost/step-up (or even a step-down buck-converter) based on the XL6019 circuit that is 50x28mm in size. This has been designed to house the converter and a standard DC jack socket to fit on one end: repurpose those…
1/10 scale coleman voltmeter cooler. voltmeter slot is 25.5x15.5mm holes are 33.5mm apart. Slot in the back is big enough for a standard JST plug. link to waterproof voltmeter :…
This is a flush mount Voltmeter 4in1 AC 100A, this is a triple holder for 3 phases - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich urządzeń, które…
Dashboard for powerbutton, voltmeter & usb ports. For Vfr 800 non HISS key bikes.
See https://www.amazon.com/dp/B00YALV0NG/ref=sspa_dk_detail_4
Passend für: https://www.printables.com/de/model/67118-ts100-power-adapter-for-makita-batteries PETG; 0,15 mm Schichtabstand; 3 Wandstärken und 20% infill. 4 x Gewindebuchsen M4 x 8,1 x 6,3. Die Bohrung für die Gewindebuchsen hat 5,2 mm…
Find out everything you need to know about the XL6009 housing on my blog: https://nerd-corner.com/diy-powerbank-with-voltage-regulator-and-voltmeter/ https://nerd-corner.com/de/verbesserter-lm2587s-spannungswandler-step-up-modul-dc-dc/
I found most of the models out there didn't fit the width of my Fluke 87 meter so I made my own. I decided to use standard ½" metal J-hooks to attach to the pegboard as I didn't want the printed ones to break off and drop my meter. This…
A replacement case / sleeve for small digital DC voltmeter ammeter display. I have one of these small digital panel mount displays that only comes in black plastic. I designed a replacement case / sleeve for it so it could be printed in…
Made this for my Toyota MR2 (Toyota MRS / Toyota MR2 Spyder) because I don't want to use the typical cigarrette adapters because comes too hot and sometimes doesn't make good connection. With this you can use an excelent buck converter…
28mm and 36mm Voltmeter Bezels
Its an holder for an USB Charger with an integrated voltmeter and a KCD1 switch (round version). You need two M5x25mm Screws. USB-Charger:…
Simple case that houses a multimeter (display) and a power switch, the case can be screwed to a surface. CAD files included, feel free to reuse. Components used: Multimeter https://www.amazon.de/gp/product/B08NTMX62K Powerswitch:…
I need a enclosure for my mini voltmeter. So i design it in Fusion 360 and print it on my Creality Ender 3.
Screw on lens cap for LTM lenses. You can print threads, even 0.977mm pitch threads - if you can't it's a skill issue.
budete potrebovat 2x M3x10 1x 0.36" voltmetr https://www.aliexpress.com/item/1005005917121603.html 1x 6x6 vypinac https://www.aliexpress.com/item/32912263133.html ano, součásti tohoto modelu jsou originální soubory na box
Clock was inspired by the following post, which was also used as instructions for the whole build. I simply created the case for it that I used, and am sharing it in case others would also like to use it. Original Post:…
Deckel mit M39x1 Gewinde für die Anschlußgewinde von Objektiven mit LTM Leica Gewinde. Der Deckel ist mit inneren Tiefen von 10mm, 16mm, 22mm und 26mm verfügbar. Der Deckel mit 10mm Tiefe paßt auf alle normalen Objektive. Manche…
Simple case for a voltmeter and test probes.
Case for the well-known Meanwell LRS-50-5 PSU : https://www.meanwell.com/webapp/product/search.aspx?prod=LRS-50 Design specificities : - Case Front panel : IEC320 C14 inlet power socket with fuse and switch - Case Rear panel :…
case for display with voltmeter
Housing for a cheap volt-/amperemeter from aliexpress for fischertechnik. Compare the images, there are a couple of similar variants. Note that the ammeter's precision is only 10mA and it will start measuring amperage only from 20mA…
Krabička pro digitální voltmetr verze V1: Vnější rozměry: 68 x 38.6 x 24 mm Rozměr otvoru: 28.6 x 58 mm Verze V2: Vnější rozměry: 68 x 38.6 x 22.8 mm Rozměr otvoru: 28.6 x 59,4 mm
I reuse voltmeter, translucent cover and metal ring from Aliexpress electric bike voltmeter (such as this https://www.aliexpress.com/item/4000706480827.html?spm=a2g0s.9042311.0.0.c86c4c4dmHJDaG ) because i find it too bulky. Print…
Support for 4 voltmeters with this holder you can put 4 voltmeters on a DIN rail You need: -4 M3x14mm or 12mm screws -4 M3 x 4.6 brass inserts, the voltmeters can be fixed with M2 x 5mm screws I used these voltmeters:…
Stand for 4 micro lcd with 4 hole for cable,and 8 holes for screw I include a cover Category: Electronics
Mini portable voltmeter for testing car and motorcycle battery voltage. built with SAE connector for an easy plug and play operation. BOM: mini voltmeter battery SAE cable SAE connector (for voltmeter)
This is a rear cover for generic cheap volt meter modules sized 22 x 10 mm, to shield the open electronics from touch or short circuit. The frame module is optional. If used with a cutout of a front plate, the rear cover can be used to…
I designed on solidworks and ı printed on the creality cr10smart pro. Bir Çok laptop ile uyumludur baskı almak için 30x30 tabla gerekiyor. How I Designed This Category: Parts
Holder for Klein MM325 multimeter. Mounts with 2 #10 screws. Tolerance to hold leads are tight. If your machine can't hold a tight tolerance it may need to be scaled up slightly (<5%).
Sam Altman OpenAI CEO - Funko Style Toy For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or PETG both work well;…
Voltmeter box, but can hold anything. Resize dimensions to fit anything you would need. Can be printed without supports and raft. Infill and wall thickness as needed.
Ein einfacher Container für den Zangenamperemeter Testboy TV 216. Zusätzlich habe ich 2 Halter für die Messspitzen mit der Skadis Aufnahme hinzugefügt. Die Halter für die Messspitzen haben eine Aufnahme von 11 mm, diese sollten auch für…
I printed it from PETG, 0.16 layer height, 3 perimeters, concentric infill. The tall column (the spring post) needs time to cool between layers, so, to achieve optimal results, consider printing 2 or more pieces simultaneously. Print…
This is hood is for the Mandler 1:2/35 LTM version lens, for a specific use case. When attached to my Barnack Leicas the indexation mark of the lens is rotated about 10 degrees clockwise so square hoods sit at an angle. This was noted by…
Gegenlichtblende für das Canon 50mm f1,8 LTM Objektiv mit M40 x 0,5 mm Gewinde. Benötigt Stützmaterial. Den Teil mit dem Gewinde mit möglichst niedriger Layerhöhe drucken. .................... Lens hood for the Canon 50mm f1,8 LTM lens…
Intended for panel voltmeter, e.g. https://www.aliexpress.com/item/1005004590759153.html?spm=a2g0o.productlist.main.3.4e3b27d6DYWB80&algo_pvid=cce4c071-e715-40ff-af15-802a6e5e556e Cover encloses step-down power supply needed for voltages…
Für zweifarbige oder mehrfarbige 3D-Modelle benötigt man beide oder mehrere Dateien extra. Das obere Bild wird auf das untere darauf gesetzt oder eingebettet. Nit einem normalen Drucker muss jede Farbe einzeln gedruckt werden um die Teile…
Halterung für Voltmeter. Passend für VW Passat 35i und Corrado. Unteres Ablagefach in der Mittelkonsole
Notes: don't print the reference combined file uses M3 screw and nut to tighten uses 2 male and 2 female XT90 sparplug look at combined parts for reference use fitting screws to fasten the bracket use shunt that is correct for your…
made a tiny case for LCD Voltmeter features a digital Display as shown in pictures overall dimensions are: 40mm x 18mm x 13mm (width x height x depth) . Designed in Germany - Thanks Freecad
This was one of my first 3d designed items. I don't remember what the print settings were but it was printed in PLA Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament:…
I lost the secondary spur gear for my Schmidling Maltmill in a cross country move, making my Gear Drive option just a passive roller. The Gear Drive Option is/was great, turning one roller slightly faster than the other, not only crushing…
This model was made so that the information from the inverter was more complete. There are inverters without a voltmeter indicator. Also, if there is one, it can be displayed as an element of room decor and at the same time monitor the…
My design for Altmill table with removable panel to access vertical table. Have not built yet!
Mini voltmeter 4-30 V DC. I printed with a 0.25mm nozzle but it is probably possible to print with a 0.4mm nozzle. It is recommended to use glue for assembly. Dimensions of the module: 24 x 10mm. I ordered it from Temu but I think it is…
