1 / 6
Bosch GOF 1600 Fixed base external power switch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for original power switch in the base handles, so it can be mounted externaly
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 296
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I'm using the Bosch GOF router mounted to my workbench in its original fixed base. I needed a more comfortable way to turn the router on and off without having to press the original start button on the base.
Slicing configuration
- 0.6 nozzle
- 0.2 layer height
- Arachne
- 3 perimeters
- 1.8 bottom and top shell thickness
- Top infill concentric
- 25% Grid infill
- Printed in PLA
What You Need
- Printed parts
- 4× KVT Tappex M3 001 Multisert threaded inserts (or similar – the insert hole is 4 mm wide and 5.4 mm deep)
- 2× M3 countersunk screws, 25 mm
- 2× M3 low-profile socket head screws (Imbus), 5 mm
- 2× M6 countersunk screws, 6 mm or longer
- Original PCB from the base handle
- Zip tie
- 2-wire cable
- Bend protection grommet (mounting hole size: 4×6.5 mm)
Required Modifications
- The tapered holes for the screw heads on the base and cover plate are printed smaller for easier printing. You will need to enlarge and deepen them using a 12 mm countersink bit.
- Solder the wires to the back side of the push button on the PCB. I left the original button in place in case I need to use it later in the primary base.
- After installing the PCB into the housing, secure the soldered cable loop with a zip tie. There's a dedicated channel for the zip tie at the bottom face of the housing
Extra models - These are included just in case you want to modify or create your own version. DO NOT PRINT THEM :-D
- Base body 3D scanned
- Switch PCB
It is alive!!!