1 / 6
Bosch GOF 1600 Fixed base external power switch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for original power switch in the base handles, so it can be mounted externaly
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm using the Bosch GOF router mounted to my workbench in its original fixed base. I needed a more comfortable way to turn the router on and off without having to press the original start button on the base.
Slicing configuration
- 0.6 nozzle
- 0.2 layer height
- Arachne
- 3 perimeters
- 1.8 bottom and top shell thickness
- Top infill concentric
- 25% Grid infill
- Printed in PLA
What You Need
- Printed parts
- 4× KVT Tappex M3 001 Multisert threaded inserts (or similar – the insert hole is 4 mm wide and 5.4 mm deep)
- 2× M3 countersunk screws, 25 mm
- 2× M3 low-profile socket head screws (Imbus), 5 mm
- 2× M6 countersunk screws, 6 mm or longer
- Original PCB from the base handle
- Zip tie
- 2-wire cable
- Bend protection grommet (mounting hole size: 4×6.5 mm)
Required Modifications
- The tapered holes for the screw heads on the base and cover plate are printed smaller for easier printing. You will need to enlarge and deepen them using a 12 mm countersink bit.
- Solder the wires to the back side of the push button on the PCB. I left the original button in place in case I need to use it later in the primary base.
- After installing the PCB into the housing, secure the soldered cable loop with a zip tie. There's a dedicated channel for the zip tie at the bottom face of the housing
Extra models - These are included just in case you want to modify or create your own version. DO NOT PRINT THEM :-D
- Base body 3D scanned
- Switch PCB
It is alive!!!