Sunburst Clock - Original Design By George Nelson

As a fan of George Nelson’s design work, I decided to recreate his Vintage Sunburst Clock and turn it into a 3D printing project. Someday I would like to own an original George Nelson clock, but for now I decided to build my own. 

Parts:

Clock Casing x1, Clock Retaining Ring x1, Clock Back Plate x1, Spokes x12, Spoke Dowels x12, Hour Hand x1, Minute Hand x1, Second Hand x1. 

Hardware:

• 2 M3ns square nuts, 2 M3x18 screws for the back plate.
• Hicarer High Torque Quartz Clock Movement. It measures 55.6mm X 55.6mm X 15.8mm with a thread depth of 6.7mm, and it uses 1 AA battery. I reused the second hand fitting and glued it into the 3D printed second hand. The hands for this clock were designed to fit this movement. I will include the product link below so you can purchase the exact model. Hicarer High Torque Quartz Clock Movement

Share a picture if you print one!