Pressure washer camera mount aka camera on a fancy stick
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print is designed to mount a camera on the end of a pressure washer wand.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
This print is designed to mount a camera on the end of a pressure washer wand. For those of you wondering, I use a 20 foot pressure washer extension pole to clean the roof gutters. This allows a camera to be mounted on the same pole for inspection. Simply replace the nozzle with this camera mount. I used ¼” in -20 x 3/8 set screw from Home Depot (see photos) at around $2 for 2 pieces. A 3/8” piece of threaded rod could be used as well, but I would recommend mounting the rod into the printed hole with an acorn nut. Printed in PETG at .2 mm height with the screw hole on the plate with no supports. Print time of about 20 minutes.
P.S. a Wyze wireless camera allows for a live view on your camera via WiFi (travel mode).
Fusion file included as I could not find the ¼ pressure washer nipple modeled anywhere.