Power Strip Mount for Uplift Desk
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uplift desk adapter brackets for adding a power strip to the underside of your Uplift desk.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 172
- Makes
- 0
- Views
- 1,744
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use this pair of brackets to mount a power strip or other accessories to the underside of your Uplift desk. It can be mounted to the desk frame crossbar's threaded holes with M8 x 10mm cap screws.
The difference between the -1 and -2 models is the orientation of the slot position. Use one of each to mount a power strip or whatever else might come in handy. Whether it will work for your power strip or other accessory depends on the spacing of the mounting holes of your item. The mounting holes of the brackets are slotted to increase the chance that it will work with a given item.
I used #6 screws to mount a power strip to these brackets. A nut on the opposite side of the bracket helps secure the screw, and then the power strip is just mounted on the heads of the screws.
Suggested print orientation would be on edge with the mounting slot perpendicular to the print bed. This provides the best mechanical properties (strength).
material: PETG
infill: 15% (minimum)
supports: from build plate only